Scout 80/800 Standard Cage Kit

Scout 80/800 Standard Cage Kit

DNC 202

Looking for a roll cage for your Scout 80 or 800? D and C Extreme has what you need. Our Scout 80/800 Standard Cage Kit fits comfortably into any Scout 80 or Scout 800 built between 1961 and 1971. We’ve taken our time and specifically designed these kits to provide you with as much space and comfort as possible. We designed the kit in a Scout 80/800 to ensure a proper and snug fit. Will it fit in a stock Scout 80/800 with a soft top? Of course! With D and C Extreme’s cage kits properly installed, you will have full use of your window cranks, headlight switch, glove box, parking brake pedal, high-beam switch, and every other dash-mounted switch.

D and C Extreme’s Scout 80/800 Standard Cage Kit is made with quality 2″ Hot Rolled Electric Welded (HREW) tube. If you don’t want anything but the best in materials we offer an upgrade to certified Drawn Over Mandrel (DOM) tube! We purchase all of our tube in 20’ lengths, cut each piece to precise measurements, bend the cage, and pre-notch all the vital joints!

Basic Scout 80/800 Standard Cage Kit includes:

• Main Hoop
• Left and Right Front Spreaders
• Left and Right Rear Spreaders
• Windshield Bar

Note: Main hoop is shipped in two pieces with internal sleeve for reassembly. This saves about $160.00 in shipping cost.

All D and C Extreme Signature Products are Made in the USA at our shop in Colorado Springs, CO!

Welding and Installation Disclaimer:

All cages come as kits and require assembly and welding. This product requires installation by a competent and certified welder, using high-quality welding equipment and supplies. If you are not a qualified welder you should hire a professional/certified welder from your area. Welding this product should only be done with a minimum 220v/175a MIG Welder and .035 wire. Minor trimming may be needed for exact fitment to customer vehicles. D and C Extreme has made every effort to make cage kits strong and easy to install. However, we cannot control the installation process of our cages and therefore, D and C Extreme cannot and will not guarantee the performance of any cage kit. Drivers of lifted or modified vehicles need to exercise extreme caution when operating said vehicle.

D and C Extreme Industries Product Disclaimer:

Because of their intended usage, the manufacturer makes no warranties whatsoever, express or implied, oral or written, to purchasers of their products regarding performance, safety, fit, merchantability, or length of service. Purchasers are responsible for selection of proper goods and must rely on their own skill or judgement that such goods are suitable for purchasers’ application.

Applications:

• 1961 – 1965 IH Scout 80
• 1965 – 1971 IH Scout 800/A/B