Scout II Standard Roll Cage Kit

Scout II Standard Cage Kit

DNC 201

Our Scout II Standard Roll Cage Kit is designed to provide you with as much space and comfort as possible. We’ve increased the amount of head room in the front section of the cage by making our main hoop wider than a factory bar. Will it fit in a stock Scout II hard top? Yes it will! When D and C Extreme’s Scout II Standard Cage Kit is properly installed you will have full use of your window cranks, headlight switch, glove box, parking brake pedal, high-beam switch, and every other dash-mounted switch.

The Scout II Standard Roll Cage is made with quality 2″ Hot Rolled Electric Welded (HREW) tube. If you don’t want anything but the best in materials we offer an upgrade to certified Drawn Over Mandrel (DOM) tube! We purchase all of our tube in 20’ lengths, cut each piece to precise measurements, bend the cage, and pre-notch all the vital joints!

Basic Scout II Standard Roll Cage Kit includes:

• Main hoop
• Left and Right Front Spreaders
• Left and Right Rear Spreaders
• Windshield bar

Note: Main hoop is shipped in two pieces with internal sleeve for reassembly. This saves about $80.00 in shipping cost. We can still ship it to you in one piece if you would like but must add the additional shipping cost.

All D and C Extreme Signature Products are Made in the USA at our shop in Colorado Springs, CO!

Welding and Installation Disclaimer:

All cages come as kits and require assembly and welding. This product requires installation by a competent and certified welder, using high-quality welding equipment and supplies. If you are not a qualified welder you should hire a professional/certified welder from your area. Welding this product should only be done with a minimum 220v/175a MIG Welder and .035 wire. Minor trimming may be needed for exact fitment to customer vehicles. D and C Extreme has made every effort to make cage kits strong and easy to install. However, we cannot control the installation process of our cages and therefore, D and C Extreme cannot and will not guarantee the performance of any cage kit. Drivers of lifted or modified vehicles need to exercise extreme caution when operating said vehicle.

D and C Extreme Industries Product Disclaimer:

Because of their intended usage, the manufacturer makes no warranties whatsoever, express or implied, oral or written, to purchasers of their products regarding performance, safety, fit, merchantability, or length of service. Purchasers are responsible for selection of proper goods and must rely on their own skill or judgement that such goods are suitable for purchasers’ application.

Applications:

1971 – 1980 IH Scout II