Scout II Dana 44 High Steer Knuckle Set

Scout II Dana 44 High Steer Knuckle Set

This Scout II Dana 44 High Steer Knuckle Set makes it easier to convert your Scout II Dana 44 to a high steer configuration. Uses standard Dana 44 ball joints and your stock Scout II parts and bolt right on without modifications. These knuckles accept all standard 3 and 4 hole Dana 44 high steer arms.

If you are doing a spring over lift or a link suspension and still want good steering geometry these knuckles are a must. A lot of people think a spring over lift is cheap and easy but we get a ton of calls about bad handling rigs after someone has done a spring over. Most of the time they did not take in to consideration the steering geometry or caster angles. These high steer knuckles allow you to put your drag link over the leaf spring and greatly reduce your drag link angle, thus reducing bump steer. If desired the tie rod can go over the leaf spring for more clearance also.