Jeep WJ Grand Cherokee Roll Cage Kit
DNC 234
If you have made the move from the Jeep XJ or ZJ to the Jeep WJ you know the Jeep Grand Cherokee’s off-road capability and heritage, but you also know that it needs some stability. Check out D and C Extreme’s Jeep WJ Grand Cherokee roll cage kit. We offer the Jeep WJ Grand Cherokee roll cage kit as a 6-point cage. For those that want even more protection, We offer an 8-point option with additional tie-ins.
The Jeep WJ Grand Cherokee cage kit is built to offer protection for passengers while providing reinforcement to the stock uni-body, all while giving you the room you need to get in and out and store your stuff. We designed this cage kit to have ample headroom in the front and rear and to allow for a usable rear seat (for kids AND adults). When properly installed you should be able to use all your handles and knobs.
The Jeep WJ Grand Cherokee Roll Cage is made with a quality 1.5″ Hot Rolled Electric Welded (HREW) tube. If you don’t want anything but the best in materials, we offer an upgrade to certified Drawn Over Mandrel (DOM) tube! We purchase all of our tube in 20’ lengths, cut each piece to precise measurements, bend the cage, and pre-notch all the vital joints!
Basic Jeep Grand Cherokee Roll Cage Kit includes:
- Left and Right Front Spreaders
- Left and Right Rear Spreaders
- Main Hoop
- Seat Belt Bar (behind front seats)
- Windshield Bar (top of windshield)
- Rear Lift Gate Bar (top of lift gate)
- Dashboard Bar (above gauges)
8 point kit
- Adds 2 more upright tie in’s behind rear set
Note: The main hoop is shipped in two pieces with an internal sleeve for reassembly. This saves about $160.00 in shipping costs.
All D and C Extreme Signature Products are Made in the USA at our shop in Colorado Springs, CO!
Welding and Installation Disclaimer:
All cages come as kits and require assembly and welding. This product requires installation by a competent and certified welder, using high-quality welding equipment and supplies. If you are not a qualified welder you should hire a professional/certified welder from your area. Welding this product should only be done with a minimum 220v/175a MIG Welder and .035 wire. Minor trimming may be needed for exact fitment to customer vehicles. D and C Extreme has made every effort to make cage kits strong and easy to install. However, we cannot control the installation process of our cages and therefore, D and C Extreme cannot and will not guarantee the performance of any cage kit. Drivers of lifted or modified vehicles need to exercise extreme caution when operating said vehicle.
D and C Extreme Industries Product Disclaimer:
Because of their intended usage, the manufacturer makes no warranties whatsoever, express or implied, oral or written, to purchasers of their products regarding performance, safety, fit, merchantability, or length of service. Purchasers are responsible for selection of proper goods and must rely on their own skill or judgment that such goods are suitable for purchasers’ application.
Applications:
- Jeep Grand Cherokee WJ 1999-2004 (All Models)
