NP 241C Transfer Case Rebuild Kit

Well if your doing and LS Swap on your Scout or other project and you where lucky enough to score a right hand drop 241C Transfer Case you are probably needing to install a SYE KIT and while you have the T-Case apart you might as well put new bearings and seals in it, Our NP 241C Transfer Case Rebuild Kit has everything in it to rebuild your 241C.

Fits: 1988-1994 GM NP 241 C transfer Cases with the 24MM wide input bearing.

Fits: Right and Left hand drop transfer cases.

NOTE:

•  Generally, GM NP241C units from 1988–1994 use the 24mm wide bearing. Units from 1995 and later typically use the 16mm narrow bearing, we have Never found a Right Hand Drop 241C with the narrow bearing. We have only fount the narrow input bearing in the Left Hand Drop Cases that are NOT HD cases.