Scout II Flat Plate Roll Cage Legs

Scout II Flat Plate Roll Cage Legs

DNC 228

It has arrived! D and C Extreme has been building roll cage kits for the International Scout line for years. Most roll cage buyers have been interested in driving the trails, going camping, or even rock crawling. Now there is a new breed of Scout owner that is interested in restoring their Scout while upgrading comfort, safety, and drive ability. For the Scout owner that wants to add a roll cage without the intrusion of the tube legs we have created the Flat Plate Roll Cage Leg.

The Flat Plate Roll Cage Leg is designed to give the driver and passenger of the Scout II as much room as possible up front with almost no intrusion from the cage. Picture this: Your Scout II roll cage is the same except the bars that run above the driver’s and passenger’s side stop at the dashboard and weld to a flat 5/16″ plate leg that follows the contour of the body to the floor and bolts down to the floor board.

If you are driving your Scout II to work or school every day, this is the option for you! No more gingerly getting in and out of your Scout II because you do not want to bang up your knees and shins. Jump in and out several times per day almost like a normal vehicle. The flat plate is 5/16″ thick steel so it is durable and adds nearly the same stability and rigidness to the Scout II as the standard tube steel. If you use your Scout II for serious off-roading or rock crawling, we suggest staying with the standard tube steel.

Kit Includes:

2ea. Flat Plate Cage Legs R/L

2ea. Floor Plates

2ea. Upper Corner Gusset

2ea. Lower Floor plate Gusset

Available on all Scout II Roll Cage Kits including:

Scout II Standard Cage Kit
Scout II Full Cage Kit
Scout II Family Cage Kit
Scout II Traveler Cage Kit
Scout II Terra Cage Kit

Applications:

• IH Scout II 1971 – 1980
• IH Scout II Terra 1976 – 1980
• IH Scout II Traveler 1976 – 1980
• IH Super Scout II 1977 – 1979