DandC Extreme - cause pretty aint enough

About D and C > Milestones
Milestones | Map | Meet the Team | Our History

February 25, 2003 - D and C adds Corbeau Seats to our growing list of products!
If you have been looking for some serious seats, D and C now offers Corbeau's full line of performance seats, mounts and harnesses! Check them out in the Parts Store!
February 2003 - Project 2 is started!
January 2003 - Project 1 is uploaded to the website! See it in our 'Extreme Buildups' area!
September 27, 2002 - www.DandCExtreme.com gets a little work.
After many months of work and time, D and C gets a new website and a new online store. Now all your favorite D and C products will be available online w/ hundreds of other high performance off-road products.
July 2002 - Project 1 Starts!
As our products get more refined, so do our buildups. "AJ" is a 1970 Scout 800A that will replace the RickRock's Scout II. This 800 is a super clean Scout that'll get our Competition SOA w/ X-over steering, Scout II Dana44s front and rear, 36x12.50 SuperSwamper TSL/SX's, Lockers, and much, much more.
April 2002 - Scout 80/800 and Scout II Cage Kits
As a follow-up to our commitment to bring you new products, D and C Extreme starts full-scale production of Cage Kits for your Scouts!
March 1, 2002 - D and C Extreme moves to a new facility.
Popularity and growth has caused great growth in D and C Extreme. We move out of our 1600 sq ft shop to a new 4,400 sq ft facility in Colorado Springs.
February 2002 - Project 2 Starts!
This Scout II will be replacing Lil Mule as Project 2. This buildup includes full width axles (D60 front, 14-bolt rear). Detroit and ARB lockers, D and Cs 1/4 elliptic 4-link conversion, Full Cage, 42x15x16.5 SuperSwamper TSLs on Military Dual beadlock Hummer Rims, and MUCH MUCH more.
August 2001 - Project 4 Starts
This 1974 Scout II gets everything Project 1 has plus cantilevers, lower gears in the TF727, Champion Beadlocks and much much more. This buildup will be uploaded to the new site in December 2002.
February 15, 2001 - D and C Extreme moves.
Due to growth and demand for our suspension conversions, D and C moves to a new 1600 sq ft facility.
November 2000 - D and C starts CAD design work on Scout and Scout II 4-link Systems.
October 1999 - D and C moves into a 300 sq ft bumper production facility.
Let's face it, D and C started in a garage at the in-laws house, just a guy and a dream. We get out of their garage and get into our own.
January 1999 - D and C is Born.
After seeing what Damian has built for his own Scout, Bill Bordner encourages Damian to start producing an aftermarket bumper line for Scouts. This marks the beginning of the madness.

If you like what you see here, please

Thanks!